Home > Gasoline Engine Oil >

EM-200 API SP 5W-20 ACEA C5 Ester Full Synthetic Gasoline Engine Oil 4L for Passenger Cars

Product Categories

Motorcycle Engine Oil [13]
Gasoline Engine Oil [116]
Diesel Engine Oil [69]
Transmission Fluid [45]
Gear Oil [16]
Hydraulic oil [23]
Lubricating Grease [38]
Brake Fluid [7]

Foshan Yingba Lubricating Oil CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

EM-200 API SP 5W-20 ACEA C5 Ester Full Synthetic Gasoline Engine Oil 4L for Passenger Cars

Contact Now

Product Detail/Gasoline Engine Oil

EM-200 Ester Fully Synthetic Gasoline Engine Oil

A passenger-car engine oil developed around the stated API performance level and SAE viscosity grade, with formulation, filling and batch documentation managed for consistent repeat supply.

EM-200API SP5W-204LPlastic Pack

Start an OEM / ODM Project View Technical Details

Gasoline Engine Oil4L

CategoryGasoline Engine Oil

ModelEM-200

PerformanceAPI SP

Viscosity / Grade5W-20

Product Positioning

Built around the application, not only the label.

Performance targets, base-oil route, additive system, packaging and test plan are aligned before production.

Deposit control

Detergent and dispersant chemistry can be selected to support engine cleanliness under the intended service profile.

Wear protection

The formulation is designed to help protect lubricated components during start-up and normal operating conditions.

Oxidation stability

Base-oil and additive selection is controlled to support viscosity retention and oil durability.

Cold-start flow

The stated SAE grade should be matched to the vehicle manual, climate and target market before release.

Technical Profile

Product specifications

Product modelEM-200

Product categoryGasoline Engine Oil

Performance levelAPI SP

SAE / consistency grade5W-20

Pack size4L

Packaging formatPlastic Pack

Referenced specification(s)GF-6; ACEA C5

Referenced standardQ/YBSP 007-2020

How We Manufacture

From approved raw materials to released finished goods.

Our work begins when qualified base oils, additives and packaging materials enter the factory. The objective is a product that can be manufactured, tested, traced and repeatedly delivered.

Requirement definition

Application, market, performance level, viscosity, packaging, order volume and documentation are confirmed.

Raw-material acceptance

Supplier status, batch documents, packaging condition and relevant incoming properties are checked before use.

Formula and work instruction

The approved formula, dosing order, tolerances, temperature, mixing time and tests are controlled by version.

Blending and in-process QC

Materials are metered, blended and sampled. Out-of-target batches remain isolated until authorized action and re-test.

Filtration and filling

Line clearance, filtration, first-piece approval, fill quantity, closure, sealing, coding and carton checks are recorded.

Final release and traceability

Finished-product tests, packaging inspection and batch documents must be complete before shipment release.

Quality Evidence

Documents that correspond to the product and batch.

Documentation is supplied according to the final SKU, contract and market requirements.

COA

Batch Certificate of Analysis

Links the batch number, production date, release tests, specification limits and actual results.

TDS

Technical Data Sheet

Describes intended use, typical properties, performance level, viscosity grade and application guidance.

SDS

Safety Data Sheet

Covers hazards, handling, storage, transport, spill response and first-aid information.

LAB

Inspection and Third-Party Testing

Finished-product reports, validation tests or qualified third-party work can be arranged by project.

OEM / ODM Cooperation

Turn a market requirement into a repeatable product.

OEM is suitable when your product specification, brand and packaging are already defined. ODM starts earlier, with product positioning, formulation route, samples, packaging and validation developed together.

Performance levelViscosity gradeBase-oil routePack sizeBottle / pail / drumLabel and cartonTDS / SDS / COAExport support

01
Requirement review
Market, equipment, specifications, pack size, volume, target cost and launch timing.
02
Feasibility and proposal
Verified formula, optimized formula or new ODM development route.
03
Sample and golden standard
Sample version, internal testing, customer feedback and approved reference standard.
04
Packaging approval
Container, closure, seal, artwork, carton, code and shipping configuration.
05
Mass production and release
Version-controlled formula, documented process, batch testing and shipment documents.

Project Support

Common cooperation questions

Can performance level and viscosity be customized?

Yes. The product route can be selected around the target equipment, market position, climate, standard and cost target.

Can the bottle, pail, label and carton be customized?

Yes. Pack size, container color, closure, seal, label, carton, shipping mark and pallet method can be developed by project.

Which documents can be supplied?

Typical project documents include TDS, SDS/MSDS, batch COA and finished-product inspection records. Third-party testing can be arranged where required.

How is repeat-order consistency controlled?

Through approved samples, product specifications, formula version control, qualified materials, production instructions, process and final testing, batch records and retained samples.

Request a Quote

Tell us what you want to manufacture.

Include the target market, application, technical standard, viscosity or grade, pack size, estimated quantity and required documents.

Selected productEM-200 Ester Fully Synthetic Gasoline Engine Oil

Company name

Contact name

Target market

Country / channel

Estimated quantity

Units, drums or tonnes

Project requirements

Application, specification, viscosity, packaging, documents and target launch date

Prepare Inquiry Summary

Product Tags: